The Beta Hi-Wall is ideal for use in warehouse applications, where high-risk products are stored in conjunction with low-risk products. The system can be used to block off an allocated high-risk area, and construction is a lot faster and safer than erecting a brick wall at heights above 6m, which would need structural columns and utilise more space. The system is demountable and can easily be removed if the occupation classification changes to low/no risk, a far more costly exercise for brick walls.
Vertical Studs: 102 x 35 x 6.5 x 0.6mm at 400mm centres
Top & Bottom Tracks: 103 x 30 x 0.6mm
Horizontal Noggings: 38 x 12 x 1.00mm at 1.800m centres.
Nogging Fixing: 70 x 25 x 25 x 0.8mm Galvanised Angles fixed to studs with 4.2 x 3mm Wafertek screws.
Boarding: 15mm tapered edge “Fireshield” gypsum board fixed to each side of partition. Staggered joints.
Vertical Studs: 152 x 35 x 6.5 x 0.8mm at 400mm centres
Top & Bottom Tracks: 154 x 50 x 0.8mm
Horizontal Noggings: 38 x 12 x 1.00mm at 1.800m centres.
Nogging Fixing: 130 x 25 x 25 x 0.8mm Galvanised Angles fixed to studs with 4.2 x 3mm Wafertek screws.
Boarding: 15mm tapered edge “Fireshield” gypsum board fixed to each side of partition. Staggered joints.
© Copyright 2018 Capco | All Rights Reserved